Available Bearings Bearing Selector Technical Info Mechanical Assemblies Torque Analysis Torque Testers New Products

Inch Precision Bearings: Flanged Bearings Shielded || Dynaroll

INCH PRECISION BEARINGS

INCH PRECISION BEARINGS

FLANGED BEARINGS SHIELDED

The table below shows available bearings of the type you have selected. Basic dimensions and load ratings are given. To complete the bearing selection process CLICK ON THE PART NUMBER of the bearing that best meets your application (left column). This will take you to the DETAILED SPECIFICATION page where you will make final selection of other important bearing parameters.

The dynamic capacities listed represent the maximum capacities based on 52% curvature of the inner and outer raceways in accordance with ABMA and ISO standards; however, since a majority of miniature and instrument bearings are lightly loaded and operate at low to moderate speeds where low torque is a primary objective, the internal geometry for a particular part number in current production/inventory may be different. We recommend that if your specific application will exceed 20% of the rated capacity listed than you should contact our applications engineering department for assistance in bearing life calculations to meet your application requirements.


Dynaroll
Bearing No.
BORE
(d)
OD
(D)
WIDTH
(Ws)
LOAD RATING (lbs)
RADIAL
AXIAL
STATIC