Dynaroll Ball Bearings Quality System: Quality Manufacturing Standards and Certification

DYNAROLL QUALITY SYSTEM

The quality system at Dynaroll is an integrated system that flows easily with most industry standards for compatibility in all processes. Our instruments and metrological equipment fall under the auspices of ISO 17025 and we require all who supply calibration equipment or services to Dynaroll Corp to be approved by a third party to the same standard. The quality system at Dynaroll Corp is compatible with TS 16949 and AS9100 requirements and has all the necessary components of each standard.

Dynaroll Corp uses the ANSI Z1.4 standard for sampling and inspection and all instruments used for measuring are traceable to NIST (National Institute for Standards and Technology). First article inspection is performed to AS9102 and uncertainty budgets are established for all in-house standards, instruments, and processes and are based on the automotive industry action group (AIAG MSA-1). This standard is also used for gauge R&R studies. Calibration is tracked with the latest software technology.

Dynaroll Corp uses the latest in SPC software to control our processes and suppliers. We work closely with our suppliers and customers, using a team effort to obtain the customer's desires.

Dynaroll Corp uses risk assessment guidelines of the ISO 14971 standard during the design control phase.

Dynaroll is certified under the following Quality Standards:

ISO 9001:2008	Quality Management System
ISO 13485:2003	Quality Management Standard for Medical Devices
ISO 14001:2004	Environmental Management Standard
OSHAS 18001:2007	Occupational Safety and Health Management System
PPAP	Production Part Approval Process used in the automotive supply chain
FDA Critical	Meets standards required by FDA Critical audits

Please visit our Quality Policy page for more quality system information and copies of the quality certificates.

COMPONENT AND PROCESS TRACEABILITY

• Dynaroll utilizes top down / bottom up sub-Assembly and component traceability.
• All Sub-Assembly and component data is maintained and stored via Laserfiche®.
• Documentation complies with ISO 13485 certification.

SPC PROCESS MONITORING

With the latest SPC software Dynaroll's quality is attributed to our comprehensive (SPC) Statistical Process Control Software throughtout the manufacturing processes.

STATE OF THE ART INSPECTION LAB

• Inspection tolerances to .000005 inch.
• CMM (Computerized Coordinate Measuring Machines)
• Laser Micrometer
• Computerized Optical Comparator
• Roundness, Hardness and Surface Finish Gauges

BALL BEARING ANALYSIS LABORATORIES

Dynaroll can perform a complete analysis of your Ball Bearings or Sub-Assembly to provide design enhancement solutions.

• MircroTorque™Rotational Analysis
• Radial play, Runout
• SEM / EDS Spectroscopic Analysis
• Lubricant Evaluation
• Noise Testing (Anderon Meter)
• Bearing Tolerances
• Failure Analysis
• Bearing Predicted Life Analysis